About Me

My photo
Ewloe, United Kingdom
Writing, tweeting, debating and occasionally getting a little over-excited about 3D Printing. But always aiming to keep it real!

Friday 10 February 2017

The 3D Printing Industry is Just Like a Tree …..


Just because one branch of the 3D printing and additive manufacturing (AM) industry is demonstrating success, it does not necessarily follow that other branches are not living up to expectations or are failing. My reason for opening with that statement will become clearer if you choose to read on, but the use of the word “branches” here was chosen because one analogy I use for the 3D printing & AM industry in my daily attempts at comprehension is that of a tree.

The seed was planted more than 30 years ago and quickly sprouted roots (the different additive processes that emerged in the early years). The trunk grew upwards and thickened (which I think is analogous with the rapid prototyping umbrella) and started to sprout branches (as the strong processes and materials development found valid applications) that today are sturdy and strong and are now branching out in new and different directions themselves. For me the branches are thus analogous to technology process types, material types, application developments etc, and they can intertwine in complex ways.

I see two of the lowest and thickest branches of the tree as the divergence of materials — plastics and metals. There are of course new and thin branches (twigs?) at this low level too — ceramics for example. However, I see the plastics and metals branches currently growing at the fastest rate, sprouting more branches from the original and producing a great deal of fruit.

On the plastics front the branches are going in myriad directions. Too many to cover every single one of them, but some stand outs are: multi-axis robot arms (Envisiontec, Stratasys, 3D Systems); multi-materials (Stratasys & 3D Systems); isotropic parts and minimal post-processing (Rize); and new engineering materials, notably from Carbon and HP, but also Stratasys, FormLabs, Roboze and EOS. One very new branch, just a bud really, in the form of a promised new system, has also emerged this week from Coobx, a Liechtenstein company. The brand is Exigo, featuring LIFT (light initiated fabrication technology). There is very little to go on, except an eye-catching teaser video, but to me it looks CLIP-like. The lid will be lifted on March 9th, according to the company’s founder Marco Schmid, who has revealed that 18 months of R&D has gone into the development of the Exigo along with numerous patents.   

On Twitter, the accusation of hype was levelled at Coobx, based on the style of the teaser video. Personally, I thought this was a bit harsh, the video is overly dramatic maybe. Extravagant even. However, no claims have yet been made that can or cannot be proved to be over exaggerated, which is the definition of hype, and certainly what happened with 3D printing in general a couple of years back. Despite the whole “hype” thing dying down (Phew!) this was not the only time I’ve seen it referenced this week.

I was somewhat disappointed to read a comment from Rize, VP of Marketing, Julie Reece, who told 3DPI at the recent SWW17 event: “Just as there was hype in the consumer/hobby market, we’ve seen similar hype in the metal market.” I have to respectfully disagree with this comment.

The successful growth and fruit bearing developments of the 3D printing plastics branch does not negate the same growth vector of the metal branch of 3D printing. There are some really amazing developments here too. Again, I can’t list them all, but the ones that stand out for me right now are XJET’s nano particle jetting process (when they introduced it at the end of 2015 most people assumed this was a decade away or more); Matsuura’s metal hybrid additive and subtractive machine; OR Lasers’ focus on democratising metal 3D printing with a capable machine well under €100k; and LPW’s work with metal powders. The latter of these I was able to get deeper insight on this week, and to understand how LPW is addressing issues around traceability and quality control — two massive issues for powder bed processes —  from the production of the powder, through storage and transit, in-process, through recycling and reuse. It’s complex but imperative work, and some of the results that I was privileged to see, are very impressive and could really open up applications and uptake.

There is also Desktop Metal. I’m reserving judgement on this one. Much like Coobx, there has been much teasing about the new system (due for unveiling later this year by all accounts). There is absolutely no visibility on the process or capabilities but there has been a vast amount of publicity around the amount of investment in this start-up company (founded 2015), which as of this week totals $97 million, following a Series C round of funding. One imagines the investors do have a tad more to go on than the generic marketing speak about metal 3D printing that dominates the company’s PR and website. Which is why I’m trying to stay open minded, and remain hopeful that this is another fruit bearing branch of the metal sector.


If you look at a tree in detail — it is wondrous and complex. Some components are immediately obvious in their presence and function, others take time to see and work out where they sprout from. This is how I see the 3D printing industry right now!

21 comments:

  1. This post is (again) the perfect way to stay in the loop of what's going on in the wide 3D printing world (while being busy with our Habibi.Works FabLab).

    Thanks Rachel - I'm sure we'll meet this year again. Any chance we'll have you at RapidTech/FabCon (20-22. June, Erfurt) or I'll make sure to come to formnext this time again :-)

    ReplyDelete
  2. Thanks Flo :-))

    Really hoping to make it over to you for RapidTech this year! NO EXAMS to deal with!! Yay!!!

    ReplyDelete
  3. Positive site, where did u come up with the information on this posting?I have read a few of the articles on your website now, and I really like your style. Thanks a million and please keep up the effective work.
    Vehicle Signs Shrewsbury

    ReplyDelete
  4. I just couldn't leave your website before telling you that I truly enjoyed the top quality info you present to your visitors? Will be back again frequently to check up on new posts. postcards printing

    ReplyDelete
  5. Superbly written article, if only all bloggers offered the same content as you, the internet would be a far better place.. Letter Printing

    ReplyDelete
  6. Such useful information! Thank you! My colleague advised click to use the same type of content.

    ReplyDelete
  7. branded paper cups Super-Duper site! I am Loving it!! Will come back again, Im taking your feed also, Thanks.

    ReplyDelete
  8. I definitely loved every little bit of it. I have you bookmarked your site to check out the new stuff you post. Commercial Tree Service

    ReplyDelete
  9. Thanks for taking the time to discuss that, I feel strongly about this and so really like getting to know more on this kind of field. Do you mind updating your blog post with additional insight? It should be really useful for all of us. Print In London

    ReplyDelete
  10. Induction heaters became very popular nowadays. People use them almost everywhere. Industrial induction heaters are considered an integral part of the industry.

    ReplyDelete
  11. Cricut Air can cut over 100 different types of materials, including paper, vinyl, iron-on, fabric, cardstock, and more. The Smart Set Dial-in Cricut Explore Air 2 is used to choose the material you’re working with, and it’s specially designed so that no matter what type of surface you cutting on, like vinyl, iron-on, cardstock, fabric, poster board, wood or paper there will always be an appropriate option available for every situation. Craft machine review and buying guide

    ReplyDelete
  12. At WIRTHFLOOR we specialize in shop de-fits, where we can grind your Brisbane commercial floor back to the original concrete and get it ready for your next flooring project or for the end of your lease. Read more this website

    ReplyDelete
  13. Rohtas Digital's eCommerce SEO packages are specially designed to boost your sales and increase your website conversions. No matter where you are based or selling to, as long as you have an online marketing we can help you boost your sales.

    ReplyDelete
  14. Jewellery or jewelry includes decorative items worn for non-public adornment, consisting of brooches, rings, necklaces, earrings, pendants, bracelets, and cufflinks. Jewellery can be attached to the frame or the clothes. From a western attitude, the time period is constrained to long lasting embellishes, except flora as an instance.

    ReplyDelete
  15. Superbly written article, if only all bloggers offered the same content as you, the internet would be a far better place
    Health Checker

    ReplyDelete
  16. It's great to see a blog that focuses on additive technologies and 3D printing. These technologies have the potential to revolutionize many different industries and have already had a significant impact in areas such as manufacturing, design, and prototyping. The RPES Blog's focus on these topics is timely and important, as the use of additive technologies is likely to continue to grow in the coming years. It will be interesting to see how the blog covers the latest developments and trends in this field, and how it helps readers understand the potential applications and benefits of these technologies. Overall, I'm looking forward to following The RPES Blog and learning more about the exciting world of additive technologies and 3D printing.

    ReplyDelete
  17. Excellent job! Additionally, you may want to consider checking out Pure THCP Cartridges

    ReplyDelete
  18. Great work! You might also want to explore dyson ball

    ReplyDelete
  19. Well done! You may also wish to investigate Best fruit juul pods.

    ReplyDelete

Note: only a member of this blog may post a comment.